AT&T CL84107 Quick Start Manual

CL84107/CL84207/CL84257/
This quick start guide provides you
CL84307/CL84357
with basic instructions only. For
more complete instructions, refer
to your Abridged user's manual
provided in the package, or see the
online Complete user's manual at
www.telephones.att.com/manuals.
Quick start guide
Part lists
Quick start guide
Ì
1 for CL84107
Ì
2 for CL84207/
CL84257
Ì
3 for CL84307/
CL84357
Install
Telephone base
Notes:
Ì
Plug one end of the telephone line cord into a telephone jack or a DSL
filter.
Ì If you have DSL high-speed Internet service, a DSL filter (not included)
is required.
Charger
Caution: Use only the power adapter(s) provided with this product.
To obtain a replacement, visit our website at
www.telephones.att.com 1 (800) 222-3111
or call
1 (866) 288-4268
Canada, dial .
Battery
Install the battery, as shown below. Charge your handset(s)
before initial use. The battery is fully charged after ten hours
of continuous charging.
THIS SIDE UP /
CE CÔTÉ VERS LE HAUT
Ì
1 for CL84107
Ì
2 for CL84207/
CL84257
Ì
3 for CL84307/
CL84357
Abridged user's manual
CL84107/CL84207/CL84257/
CL84307/CL84357
DECT 6.0 corded/cordless
telephone/answering system
CL84107/CL84207/CL84257/ with caller ID/call waiting
CL84307/CL84357
Caution: Use only the supplied rechargeable battery or replacement
battery (model BT183342/BT283342).
Overview
Handset Handset
Ì
CHARGE light On when the handset is charging in DIR
the charger.
PUSH TO TALK Ì Press to initiate a one-to-one or
one-to-group broadcast.
Ì
Press and hold to broadcast to a
group of system devices.
Ì CID
REDIAL Press repeatedly to view the last 10
PAUSE
numbers dialed.
Ì
While entering numbers, press and
hold to insert a dialing pause. Telephone base
Ì
. In MENU When the handset is not in use,
FLASH/PTT
SELECT
press to show the menu.
Ì
While in the menu, press to select
an item or save an entry or setting.
Ì
Press to make or answer a call.
FLASH
Ì
During a call, press to answer an
PHONE
incoming call when you receive a
call waiting alert.
CID
Ì
During a call, press to hang up.
CANCEL
Ì
While in a menu, press to cancel an
OFF
operation, back up to the previous
menu, or exit the menu display; or
press and hold this button to exit
to idle mode.
Ì
1 Press and hold to set or dial your
MENU/SELECT
voicemail number.
Ì
Press to switch to tone dialing
temporarily during a call if you
have pulse service.
Ì
While entering names, press to
DIR
change the next letter to upper or
lower case.
Ì
Press and hold to enter the
QUIET mode setting screen, or to
deactivate QUIET mode.
Ì
Press to make or answer a call
using the speakerphone.
CANCEL
Ì
During a call, press to mute the
MUTE
microphone.
DELETE
Ì
Press to delete digit or character.
Ì
Press to block the incoming call
CALL BLOCK
when the telephone is ringing.
Ì
When on a call, press to block the
call.
Ì
When the handset is not in use,
press to show the Smart call
blocker menu.
Telephone base
Ì
Press to block the incoming call
/ CALL BLOCK
when the telephone is ringing or
during the call.
Ì
When the telephone base is not
in use, press to show the Smart
call blocker menu
Ì
REDIAL/PAUSE Press repeatedly to view the last
10 numbers dialed.
Ì While entering numbers, press
and hold to insert a dialing
pause.
Ì
Press to turn the built-in
/ ANS ON/OFF
answering system on or off.
Ì
/ REPEAT During playback, press to repeat
the playing message.
Ì
During playback, press twice to
play the previous message.
Ì
/ SKIP Press to skip a message.
Ì
/ PLAY/STOP Press to start or stop message
playback.
Ì
Press DIR to show directory entries Ì
During a call, press to mute the
MUTE/DELETE
when the handset is not in use.
microphone.
Ì
Ì When the telephone is ringing,
Press to scroll up or down while in
press to mute the ringer
menus.
temporarily.
Ì
Press to increase or decrease the
Ì
While reviewing the caller ID log,
listening volume when on a call.
directory, redial memory, allow
Ì
Press CID to show caller ID log list, star name list, or block list,
when the handset is not in use.
press to delete an individual
entry.
Ì
While predialing, press to delete
digits.
Ì
Ì During message or
Press to initiate a one-to-one or
announcement playback, press
one-to-group broadcast.
to delete the playing message
Ì
Press and hold to broadcast to a
or announcement.
group of system devices.
Ì
Press twice to delete all old
Ì
During a call, press to answer an
messages when the telephone
incoming call when you receive
is not in use.
a call waiting alert.
Ì
/SPEAKER Press to make or answer a call
Ì
Press qCID to show caller ID
using the speakerphone.
log when the telephone is not
Ì
in use. MIC Microphone.
Ì
Press to scroll down while in
Ì
menus and lists. 1 Press and hold to set or to dial
your voicemail number.
Ì
While entering names or
numbers, press to move the
Ì Press to switch to tone dialing
TONE /a>A
cursor to the left.
temporarily during a call if you
Ì
When the telephone is not in have pulse service.
Ì
use, press to show the menu. While entering names, press to
Ì
While in the menu, press to change the next letter to upper
or lower case.
select an item or save an entry
or setting.
Ì
Press repeatedly to display
QUIET #
Ì other dialing options when
Press pDIR to show directory
reviewing a caller ID log entry.
entries when the telephone is
Ì
Press and hold to enter the
not in use.
Ì QUIET mode setting screen, or
Press to scroll up while in menus
to deactivate QUIET mode.
and lists.
Ì
While entering names or Ì
While in idle mode, press to
VOL / VOL
numbers, press to move the
adjust the base ringer volume.
cursor to the right.
Ì
During message playback, press
to adjust the listening volume.
Ì While in a menu, press to cancel
Ì
an operation, back up to the While the phone is idle, press to
/ FIND HS
previous menu, or exit the menu page all handsets.
display; or press and hold this
Ì
IN USE indicator On when the telephone is in use,
button to exit to idle mode.
or when the answering system is
Ì
When the telephone base is
answering an incoming call.
ringing, press to mute the ringer
Ì
On when a handset is being
temporarily.
registered.
Ì
Press and hold while the Ì
Flashes when there is an
telephone is not in use to erase
incoming call or when all
the missed call indicator.
handsets are being deregistered.
Ì
Flashes when another telephone
is in use on the same line.
Basic initial settings
We recommend you program your telephone system
before use. The following are a few examples of common
features to set before using the telephone. Refer to the
Handset and telephone base settings and Answering
system settings in the Abridged user's manual or the
online Complete user's manual for detailed instructions on
setting all telephone features.
Date and time
Note: Set the date/time before using the answering system.
Using a cordless handset or the telephone base:
1. -> or -> Set date/time -> SELECT.
2. Enter the month, day and year using the dialing keys ->
SELECT.
3. Enter the hour and minute using the dialing keys.
4. or to choose AM or PM -> SELECT.
Basic answering system setup via
voice guide
You can follow the voice guide to record your own
announcement, set the number of rings and set the
message alert tone.
Using the telephone base:
1. -> or -> Answering sys -> SELECT.
2. or -> Voice guide -> SELECT.
3. Set up the answering system by inputting the
designated numbers, as instructed.
Record your own announcement
Your outgoing announcement plays when calls are
answered by the answering system. You can use the preset
announcement to answer calls, or replace it with your own
recorded announcement.
Using a cordless handset or the telephone base:
1. -> or -> Answering sys -> SELECT.
2. to select Announcement.
3. to select Record annc.
4. After the tone, speak towards the handset or telephone
base to record your announcement. Press 5 to end
recording.
Number of rings
You can set the answering system to answer an incoming
call after 2, 3, 4, 5, or 6 rings. You can also select toll saver.
If you choose toll saver, the answering system answers
a call after two rings when you have new messages, and
after four rings when there are no new messages. This
enables you to check for new messages and avoid paying
unnecessary long distance charges if you are calling from
out of your local area.
If you want the built-in answering system instead of the
voicemail to answer a call, you should set the answering
system to answer a call at least two rings before the
voicemail is set to answer. Contact your telephone service
provider for information on your voicemail settings.
Using a cordless handset or the telephone base:
1. -> or -> Answering sys -> SELECT.
2. or -> Ans sys setup -> SELECT.
3. or -> # of rings -> SELECT.
4. or to choose among 2, 3, 4, 5, 6, or Toll saver ->
SELECT.
Ringer volume
You can set the ringer volume level to one of the six levels,
or turn the ringer off.
Using a cordless handset or the telephone base:
-> Ringers -> SELECT.
1. -> or
2. to select Ringer volume.
3. or to choose the desire level -> SELECT.