Troubleshooting - AT&T CL84367 Complete User's Manual

Appendix

Troubleshooting

If you have difficulty with your phone, please try the following suggestions.
For Customer Service, visit our website at
1 (800) 222-3111
call
My telephone doesn't work at all.
Make sure the power cord is securely plugged in.
f f
Make sure you plug the battery connector securely into the cordless handset.
f f
Make sure you plug the telephone line cord securely and firmly into the
f f
telephone base and the telephone wall jack.
Charge the battery in the cordless handset for at least 10 hours. For
f f
optimum daily performance, return the cordless handset to the charger
when not in use.
If the battery is depleted, it may take approximately 30 minutes to charge
f f
the handset before it shows Low battery. See page 10 for details.
Reset the telephone base. Unplug the electrical power. Wait for
f f
approximately 15 seconds, then plug it back in. Allow up to one minute for
the cordless handset and telephone base to reset.
You may need to purchase a new battery. Please refer to
f f
Battery installation and charging in this user's manual on pages 10-11.
The display shows No line. I cannot get a dial tone.
Try all the suggestions, as mentioned above.
f f
If the previous suggestions do not work, disconnect the telephone line
f f
cord from your telephone and connect the telephone line cord to
another telephone.
If there is no dial tone on that other telephone either, your telephone line
f f
cord may be defective. Install a new telephone line cord.
If changing the telephone line cord does not help, the wall jack (or
f f
the wiring to this wall jack) may be defective. Try using a different wall
jack in your home to connect your CL84107/CL84207/CL84257/CL84307/
CL84327/CL84347/CL84357/CL84367 telephone, or contact your
telephone service provider (charges may apply).
I cannot dial out.
Try all the suggestions, as mentioned above.
f f
Make sure you have a dial tone before dialing. The cordless handset may
f f
take a second or two to find the telephone base and produce a dial tone.
This is normal. Wait an extra second before dialing.
. In Canada, dial
133
www.telephones.att.com
1 (866) 288-4268
or
.