AT&T CL84107 Quick Start Manual

CL84107/CL84207/CL84257/
This quick start guide provides you
CL84307/CL84327/CL84347/
CL84357
with basic instructions only. For
more complete instructions, refer
to your Abridged user's manual
provided in the package, or see the
online Complete user's manual at
www.telephones.att.com/manuals.
Quick start guide
Part lists
Quick start guide
Ì
1 for CL84107
Ì
2 for CL84207/
CL84257
Ì
3 for CL84307/
CL84327/
CL84347/
CL84357
Install
Telephone base
Notes:
Ì
Plug one end of the telephone line cord into a telephone jack or a DSL
filter.
Ì If you have DSL high-speed Internet service, a DSL filter (not included)
is required.
Charger
Caution: Use only the power adapter(s) provided with this product.
To obtain a replacement, visit our website at
www.telephones.att.com 1 (800) 222-3111
or call
1 (866) 288-4268
Canada, dial .
Battery
Install the battery, as shown below. Charge your handset(s)
before initial use. The battery is fully charged after ten hours
of continuous charging.
THIS SIDE UP /
CE CÔTÉ VERS LE HAUT
Ì
1 for CL84107
Ì
2 for CL84207/
CL84257
Ì
3 for CL84307/
CL84327/
CL84347/
CL84357
Abridged user's manual
CL84107/CL84207/CL84257/
CL84307/CL84327/CL84347/
CL84107/CL84207/CL84257/ CL84357
CL84307/CL84327/CL84347/ DECT 6.0 corded/cordless
CL84357 telephone/answering system
with caller ID/call waiting
Caution: Use only the supplied rechargeable battery or replacement
battery (model BT183342/BT283342).
Handset
Overview
MUTE
DELETE
CALL BLOCK
Handset
Ì
CHARGE light On when the handset is charging in
the charger.
Ì
PUSH TO TALK Press to initiate a one-to-one or
one-to-group broadcast.
Ì
Press and hold to broadcast to a
group of system devices.
Ì
Press repeatedly to view the last 10
REDIAL
Telephone base
PAUSE
numbers dialed.
Ì
While entering numbers, press and
/ FIND HS
hold to insert a dialing pause.
. In
VOL /
Ì
MENU When the handset is not in use,
SELECT
press to show the menu.
Ì
While in the menu, press to select
an item or save an entry or setting.
IN USE indicator
Ì
DIR Press DIR to show directory entries
when the handset is not in use.
Ì
Press to scroll up or down while in
menus.
Ì
Press to increase or decrease the
listening volume when on a call.
Ì
CID Press CID to show caller ID log
when the handset is not in use.
Ì
Press to make or answer a call.
FLASH
FLASH/PTT
Ì
During a call, press to answer an
PHONE
incoming call when you receive a
call waiting alert.
Ì
During a call, press to hang up.
CANCEL
Ì
While in a menu, press to cancel an
OFF
operation, back up to the previous
CID
menu, or exit the menu display; or
press and hold this button to exit
to idle mode.
Ì
Press and hold to set or dial your
1
voicemail number.
Ì
Press to switch to tone dialing
temporarily during a call if you
MENU/SELECT
have pulse service.
Ì
While entering names, press to
change the next letter to upper or
lower case.
Ì
Press and hold to enter the
DIR
QUIET mode setting screen, or to
deactivate QUIET mode.
Ì
Press to make or answer a call
using the speakerphone.
Telephone base
Ì
Ì CANCEL While in a menu, press to cancel
During a call, press to mute the
an operation, back up to the
microphone.
previous menu, or exit the menu
Ì
Press to delete digit or character.
display; or press and hold this
button to exit to idle mode.
Ì
Press to block the incoming call
Ì
When the telephone base is
when the telephone is ringing.
ringing, press to mute the ringer
Ì
When on a call, press to block the
temporarily.
call.
Ì
Press and hold while the
Ì
When the handset is not in use,
telephone is not in use to erase
press to show the Smart call
the missed call indicator.
blocker menu.
Ì
Press to block the incoming call
/ CALL BLOCK
when the telephone is ringing or
during the call.
Ì
When the telephone base is not
in use, press to show the Smart
call blocker menu.
REDIAL/PAUSE Ì
Press repeatedly to view the last
10 numbers dialed.
Ì
While entering numbers, press
and hold to insert a dialing
pause.
Ì
/ ANS ON/OFF Press to turn the built-in
answering system on or off.
/ REPEAT Ì During playback, press to repeat
the playing message.
Ì
During playback, press twice to
play the previous message.
Ì
/ SKIP Press to skip a message.
Ì Press to start or stop message
/ PLAY/STOP
playback.
Ì
While the phone is idle, press to
Ì
MUTE/DELETE During a call, press to mute the
page all handsets.
microphone.
Ì
VOL While in idle mode, press to
Ì When the telephone is ringing,
adjust the base ringer volume.
press to mute the ringer
Ì During message playback, press
temporarily.
to adjust the listening volume.
Ì
While reviewing the caller ID log,
Ì
On when the telephone is in use, directory, redial memory, allow
or when the answering system is list, star name list, or block list,
answering an incoming call. press to delete an individual
Ì entry.
On when a handset is being
Ì
registered. While predialing, press to delete
Ì digits.
Flashes when there is an
Ì
incoming call or when all During message or
announcement playback, press
handsets are being deregistered.
Ì to delete the playing message
Flashes when another telephone
or announcement.
is in use on the same line.
Ì
Press twice to delete all old
Ì
Press to initiate a one-to-one or
messages when the telephone
one-to-group broadcast.
is not in use.
Ì
Press and hold to broadcast to a
group of system devices.
Ì
Press to make or answer a call
/SPEAKER
Ì During a call, press to answer an
using the speakerphone.
incoming call when you receive
MIC Ì Microphone.
a call waiting alert.
Ì
Press qCID to show caller ID
Ì
1 Press and hold to set or to dial
log when the telephone is not
your voicemail number.
in use.
Ì
Press to scroll down while in
Ì
Press to switch to tone dialing
TONE /a>A
menus and lists.
temporarily during a call if you
Ì
While entering names or
have pulse service.
numbers, press to move the
Ì
While entering names, press to
cursor to the left.
change the next letter to upper
Ì
When the telephone is not in
or lower case.
use, press to show the menu.
Ì
Ì Press repeatedly to display
While in the menu, press to QUIET #
other dialing options when
select an item or save an entry
or setting. reviewing a caller ID log entry.
Ì
Ì Press and hold to enter the
Press pDIR to show directory
QUIET mode setting screen, or
entries when the telephone is
to deactivate QUIET mode.
not in use.
Ì
Press to scroll up while in menus
and lists.
Ì
While entering names or
numbers, press to move the
cursor to the right.
Basic initial settings
We recommend you program your telephone system
before use. The following are a few examples of common
features to set before using the telephone. Refer to the
Handset and telephone base settings and Answering
system settings in the Abridged user's manual or the
online Complete user's manual for detailed instructions on
setting all telephone features.
Date and time
Note: Set the date/time before using the answering system.
Using a cordless handset or the telephone base:
1. -> or -> Set date/time -> SELECT.
2. Enter the month, day and year using the dialing keys ->
SELECT.
3. Enter the hour and minute using the dialing keys.
4. or to choose AM or PM -> SELECT.
Basic answering system setup via
voice guide
You can follow the voice guide to record your own
announcement, set the number of rings and set the
message alert tone.
Using the telephone base:
1. -> or -> Answering sys -> SELECT.
2. or -> Voice guide -> SELECT.
3. Set up the answering system by inputting the
designated numbers, as instructed.
Record your own announcement
Your outgoing announcement plays when calls are
answered by the answering system. You can use the preset
announcement to answer calls, or replace it with your own
recorded announcement.
Using a cordless handset or the telephone base:
1. -> or -> Answering sys -> SELECT.
2. to select Announcement.
3. to select Record annc.
4. After the tone, speak towards the handset or telephone
base to record your announcement. Press 5 to end
recording.
Number of rings
You can set the answering system to answer an incoming
call after 2, 3, 4, 5, or 6 rings. You can also select toll saver.
If you choose toll saver, the answering system answers
a call after two rings when you have new messages, and
after four rings when there are no new messages. This
enables you to check for new messages and avoid paying
unnecessary long distance charges if you are calling from
out of your local area.
If you want the built-in answering system instead of the
voicemail to answer a call, you should set the answering
system to answer a call at least two rings before the
voicemail is set to answer. Contact your telephone service
provider for information on your voicemail settings.
Using a cordless handset or the telephone base:
1. -> or -> Answering sys -> SELECT.
2. or -> Ans sys setup -> SELECT.
3. or -> # of rings -> SELECT.
4. or to choose among 2, 3, 4, 5, 6, or Toll saver ->
SELECT.
Ringer volume
You can set the ringer volume level to one of the six levels,
or turn the ringer off.
Using a cordless handset or the telephone base:
-> Ringers -> SELECT.
1. -> or
2. to select Ringer volume.
3. or to choose the desire level -> SELECT.