Voice Guide To Set Answering System - AT&T CL84367 Complete User's Manual

Answering system
Answering system settings

Voice guide to set Answering system

This feature is an alternative way for you to do the basic
setup of the answering system. You can follow the voice
guide to record your own announcement, set the number
of rings, and set the message alert tone.
This feature is only available on the telephone base.
1. When the telephone base is in idle mode, press
MENU/
SELECT
2. Press q or p
CID
/SELECT.
press
MENU
3. Press q or p
CID
/SELECT. You hear a voice prompt, "This voice
MENU
guide will assist you with the basic setup of your
answering system."
4. Setup your answering system by inputting designated numbers, as
instructed in the voice guide.
Notes:
You can press CANCEL to quit the voice guide at any time.
f f
If the system does not receive any input, it will play an alert message. If there is still no input, it will announce "Sorry, I
f f
still have not received any input. If you want to restart the voice guide, please enter the menu and select Voice guide under
Answering system. Good bye."
After a power outage, the system prompts you to set the date and time, and Smart call blocker. After these settings are
f f
done or skipped, the system prompts if you want to set up the answering system via voice guide. Press
to start the setup.
.
to scroll to Answering sys, then
DIR
to scroll to Voice guide, then press
DIR
109
Play messages
>Answering sys
Answer ON/OFF
>Voice guide
Setting up
Answering sys...
/SELECT
MENU
p
q
p
q