Image Shape
If you want to change the grid color for visibility, press [Esc],
then select a different Pattern Color setting in the Point
Correction menu.
a
h
Use the arrow buttons to move to the point you want to correct, then
press [Enter].
i
Use the arrow buttons to correct distortion as necessary.
j
To correct any remaining points, press [Esc] to return to the previous
screen, then repeat steps 8 and 9.
k
When you are finished, press [Esc].
• To save the current shape of an image you have adjusted, select Save
Memory. You can save up to three image shapes in the memory.
a
s Installation > Geometry Correction > Memory > Save Memory
• To reset the Point Correction settings to their original positions,
select Reset on the Point Correction screen.
g g Related Links
• "Correcting the Image Shape with Quick Corner"
Loading Image Shape Setting from Memory
You can load the image shape settings you selected and saved to the
projector's memory and apply them to the current image.
a
Turn on the projector and display an image.
b
Hold down the [Num] button on the remote control, and then press
the numeric button (1, 2, or 3) that matches the number of the saved
setting.
c
When you have finished loading the settings, follow the on-screen
instructions.
65
p.58