Combination Of Functions - Omron F3SG RE Series User Manual

2-1. Combination of Functions

Possible combinations of the F3SG-RA functions are shown in the table below. The combinations in the table
are available under certain conditions. The other functions can be combined without any limitations.
The functions listed in the table below are not available for the F3SG-RE.
Refer to 2-18. Setting Zone Adjacency Conditions for further information.
The DIP Switch must be set so as to allow the F3SG-R to be configurable by the Configuration Tool. Refer to
Chapter 3 Setting with DIP Switch for more information.
YES: Combination available
YES-C: Combination available by setting with Configuration Tool.
NO: Combination unavailable
Fixed
Blanking
Fixed Blanking -
Floating Blanking YES-C
Reduced Resolution NO
Muting/Override YES
Pre-Reset NO
Warning Zone YES-C
EDM YES
Interlock YES
*1.This combination requires that the Floating Blanking zone covers the full detection zone and that the
Muting/Override function also covers the full detection zone.
*2.When the Fixed Blanking and Floating Blanking are selected, the top or bottom beam must be included in
the Fixed Blanking zone, as shown in the left figure below. It is not allowed to set the Fixed Blanking zone
not to cover the top or bottom beam, as shown in the right figure below. It is also not allowed to set a Fixed
Blanking zone to split a Floating Blanking zone.
Floating
blanking zone
Fixed blanking
zone
Floating Reduced
Blanking Resolution
YES-C NO
*2
- NO
*2
NO -
YES NO
*1
NO YES-C
YES-C NO
YES YES-C
YES YES-C
System Operation and Functions
Muting/ Warning
Pre-Reset
Override
YES NO YES-C
YES NO YES-C
*1
NO YES-C
- NO YES-C
NO - YES-C
YES-C YES-C
YES YES YES-C
YES NO YES-C
Floating
blanking zone
Fixed blanking
zone
EDM Interlock
Zone
YES YES
YES YES
NO YES-C YES-C
YES YES
YES NO
- YES-C YES-C
- YES
YES -
F3SG-R
User's Manual
E
23