Extending Cable Length With Commercially Available Cable; Adapter Cable (A) - Omron F3SG RE Series User Manual

4-5-3-4. Extending Cable Length with Commercially Available Cable

When you need to use a cable that is not specified by OMRON, use a cable that satisfies the following
specifications.
1. Emitter: 5-wire Receiver: 8-wire
2. 0.3 mm or larger, conductor resistance 0.058 ohms/m max.
2
3. Mute A and Mute B lines, and 24 VDC and 0 VDC lines must be used as twisted-pair lines.
Do not use cables in the same conduit as high voltage or electric power lines.

4-5-3-5. Adapter Cable (A)

This Adapter Cable converts the wiring for MS4800 Series Safety Light Curtain to that for F3SG-RA
Series.
<Wiring conversion>
Adapter Cable Model
F39-JGR3M-A55-L
F39-JGR3M-A88-D
Note that the Adaptor Cable restricts the following functions related to wiring.
Wiring
Signal name MS4800
OSSD 1, 2 X
Start or EDM
(Mode Select) X
(RESET)
EDM
X
Auxiliary output
X
Muting input
Test input X
For more information on setting the functions by the DIP Switch, refer to Chapter 3 Setting with DIP Switch. For more
information on setting the functions by the Configuration Tool, refer to Safety Light Curtain Configuration tool for Model
F3SG (SD Manager 2) User's Manual.
Converted from
MS4800 series emitter
MS4800 series receiver
F3SG functions
F3SG
X Safety Output
Interlock, Lockout Rest,
Override
X
External Device
Monitoring
Auxiliary Output
X
X Muting, Pre-Reset, etc.
X External Test
Wiring/Installation
Converted to
F3SG-RA series emitter
F3SG-RA series receiver
Restrictions by using Adapter Cable
Available.
Not available. The Interlock function of the F3SG-RA
must be set to the Auto Reset mode.
Not available. The EDM function of the F3SG-RA
must be disabled.
Available. To use this function, the Output Operation
Mode must be changed by the Configuration Tool.
Not available.
Not available.
E
F3SG-R
173
User's Manual