Quick Reference Table For X11Sds-8C/12C/14C/16C - Supermicro SuperServer 1019D-FRN5TP User Manual

Quick Reference Table for X11SDS-8C/12C/14C/16C

Jumper Description
JBM1 IPMI Shared LAN Enable/Disable
JBT1 CMOS Clear
JPG1 Onboard VGA Enable/Disable
JPT1 Onboard TPM 2.0 Enable/Disable
JPME2 Manufacturing Mode Select
JVRM1 VRM SMB Data (to BMC or PCH)
JWD1 Watch Dog Timer
LED Description
BMC_HB_LED1 BMC Heartbeat
PWR_LED1 Power LED
LED1 UID LED
LED2 Overheat/PWR Fail/Fan Fail
Connector Description
BT1 Onboard Battery
FAN1 - FAN5 CPU/System Fan Headers
JEDSFF1, JEDSFF2 EDSFF Short Header (Shared with M.2 M-Keys)
JL1 Chassis Intrusion Header
JMA1 Receptacle for AOM-SMF-TP4F
JMD1 M.2 Slot E-Key 2230 (PCI-E 3.0 x2/USB2.0)
JMD2 M.2 Slot B-Key 2242/3042 (PCI-E 3.0 x2/SATA3.0/USB3.0)
JMD3 M.2 Slot M-Key 2242/80/110 (PCI-E 3.0 x4/SATA3.0) Shared with JEDSFF1
JMD4 M.2 Slot M-Key 2242/80/110 (PCI-E 3.0 x4/SATA3.0) Shared with JEDSFF2
JP1 4-pin Power Connector for HDD use
JPI2C1 Power I
JPWR1 8-pin +12V DC Power Connector
JPWRST Power and Reset Button
JRK1 Intel RAID Key Header (supporting AIOM Slots)
JSIM1 Nano SIM Card Socket
JSLOT1 - JSLOT4 Supermicro Advanced I/O Module (AIOM)
*Please unplug power before removing/installing module cards
JTPM1 Trusted Platform Module (TPM)/Port 80 Connector
JUID UID Switch Header
JVGA1 VGA Header
PWR1 - PWR2 Bus Bar Connector (to AOM-SMF-TP4F)
S-SATA1 - S-SATA2 SATA 3.0 Ports
SRW1 - SRW8 M.2 Holding Screws
USB0 USB3.0 Gen 1 Type A Header
C System Management Bus (Power SMB) Header
2
17
Chapter 1: Introduction
Default Setting
Pins 1-2 (Enabled)
Open: Normal
Pins 1-2 (Enabled)
Pins 2-3 (Disabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Blinking Green: BMC Normal
Solid Green: Power On
Solid Blue: Unit Identified
Solid Red: Overheat
Blinking Red: PWR Fail or Fan Fail