Headers And Connectors - Supermicro SuperServer 1019D-FRN5TP User Manual

4.2 Headers and Connectors

Fan Headers
The X11SDS series has five 4-pin fan headers (FAN1 - FAN5). These headers are backwards-
compatible with the traditional 3-pin fans. However, fan speed control is available for 4-pin
fans only by Thermal Management via the IPMI 2.0 interface. Refer to the table below for
pin definitions.
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened. Refer to
the table below for pin definitions.
SATA 3.0 Ports
The X11SDS series motherboard has two S-SATA 3.0 ports. Refer to the table below for pin
definitions.
Chapter 4: Motherboard Connections
Fan Header
Pin Definitions
Pin# Definition
1 Ground (Black)
2 2.5A/+12V (Red)
3 Tachometer
4 PWM_Control
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
SATA 3.0 Port
Pin Definitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
43