Table of Contents
Advertisement
Desktop 5130DB-IL User's Manual
Quiet Boot
Use this feature to select the screen display between the POST messages and the OEM logo
upon bootup. Uncheck the box to display the POST messages. Check the box to display the
OEM logo instead of the normal POST messages.
Bootup Num-Lock
Use this feature to set the Power-on state for the <Numlock> key. The options are Off and On.
Wait for "F1" If Error
Use this feature to force the system to wait until the 'F1' key is pressed if an error occurs.
The options are Disabled and Enabled.
Re-try Boot
If this item is enabled, the BIOS will automatically reboot the system from a specified boot
device after its initial boot failure. The options are Disabled, Legacy Boot, and EFI Boot.
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or generate an NMI based
on jumper settings when it has expired for more than 5 minutes. The options are Disabled
and Enabled.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
Seconds Override for the user to power off the system after pressing and holding the power
button for 4 seconds or longer. Select Instant Off to instantly power off the system as soon
as the user presses the power button. The options are Instant Off and 4 Seconds Override.
AC Loss Policy Depend On
Use this feature to set the power state after a power outage. Select Stay Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay Off, Power On, and Last State.
EuP Support
EuP, or Energy Using Product, is a European energy-saving specification that sets a standard
on the maximum total power consumption on electrical products. Check the box to activate
EUP support. The default is Unchecked (Disabled).
56
Advertisement
Table of Contents
