Removing And Installing The Front Bezel - Supermicro 5130DB-IL User Manual

Desktop 5130DB-IL User's Manual

2.4 Removing and Installing the Front Bezel

Front Bezel Removal
1. Power down the system and remove the power cord from the rear of the power supply
as described in Section 2.1 and remove the chassis cover as described in Section 2.2.
2. Remove the front bezel by pulling the release tabs outward, and then pulling the bezel
off the front of the chassis.
Front Bezel Installation
1. Replace the chassis bezel by inserting the tabs on the right side of the bezel into their
mounting holes on the chassis.
2. Close the bezel so that the release tabs click into their locked positions on the left side
of the chassis.
Figure 2-5. Removing the Front Bezel
Figure 2-6. Installing the Front Bezel
20
Release Tabs
Peripheral Drive
Bay Covers
2
2