Power Supply/Cooling Module Installation; Parts Check List; Ac Power Supply/Cooling Module Procedure - Acer Altos S205F User Manual

Acer S205F / S200F User's Manual
2.4 Power Supply/Cooling Module
Installation
Install in the rear of the enclosure in positions 1 and 5.
Warning Do not remove covers from the Power Supply/Cooling (PSU) module. Danger of electric shock
inside. Return the PSU to your supplier for repair.

2.4.1 Parts Check List

Power Supply/Cooling Modules of the following type:
• AC' 450W PSU

2.4.2 AC Power Supply/Cooling Module Procedure

Important If the cable strain relief wire tab is upside down it must be inverted by squeezing together the two
sides of the tab removing them from their mountings, inverting and then replacing them, as shown
in Figure
Figure 2–4
1 Check for damage, especially to the rear connector on the supply.
Caution Handle the module carefully and avoid damaging the connector pins. Do not install the module if
any pins appear to be bent.
2 With the PSU handle in the open position
2–6).
Important install the Power Supply/Cooling module in the right hand bay (Rear Bay 1) of the enclosure in an
"upside down* orientation.
3 Cam the module home by manually closing the PSU handle
the handle latches engage.
4 Connect the power supply cord to the power source and switch the power supply ON.
24
2–4.
Inverting the Cable Strain Relief
(Figure 2–5), slide the module into the enclosure
(Figure 2–7). A click should be heard as
(Figure