Page 2
Copyright Copyright 2004 by Acer Inc., All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical,...
Introduction of ACER USB 2.0 Flash Stick 1.1.1 The main capability index 1.1.2 ACER USB 2.0 Flash Stick overview 1.1.3 Connection with computer The system requirement of ACER USB 2.0 Flash Stick 1.2.1 Requirement for computer 1.2.2 Requirement for operation system 1.2.3...
USB 2.0, which is plug-and-play, electronic writing protection, high speed read-write. It is very convenient to use “ACER USB 2.0 Flash Stick” and can be run on several operation systems such as Windows 98, Windows ME, Windows 2000, Windows XP, Mac OS 9.1, Linux 2,4x and above without any physical drive equipment and extra...
USB interface, you need to equip a transfer card with PC-USB interface, and then you can use ACER USB 2.0 Flash Stick Mostly, for the desktop, the USB interface is on the upper of the host computer back, as the picture 1.2 show: USB interface figure: 1.2...
Due to there is Windows 98 driver in the application program, so as you install the application program in Windows 98SE, you also install the driver program at the same time. Insert the CD of ACER USB 2.0 Flash Stick into the CE-ROM, and a window will pop up, as follows picture 2.1: figure :2.1 Click the ”Install”...
D before connecting ACER USB 2.0 Flash Stick, then the disk symbol of ACER USB 2.0 Flash Stick is E. One more need to pay attention: when you are using ACER USB 2.0 Flash Stick for the first time, please kindly wait for a moment, because the system needs some time to find the driver and it only for the first time using.
When it is working, the indicator light glints quickly. And after data reading finish, the light will stop glinting. Notice: Don’t pull out the ACER USB 2.0 Flash Stick when the light is still glinting, or your data will be destroyed.
2) Insert the ACER USB 2.0 Flash Stick to the computer’s USB interface Login as root, type order: mount/dev/sda/mnt This order will put the ACER USB 2.0 Flash Stick to the directory of “ /mnt”. “/mnt” is a directory made by user.
4. Q: What is the meaning of LED for ACER USB 2.0 Flash Stick? Answer: The light of LED is on, ACER USB 2.0 Flash Stick has been connected to the computer successfully; the light is flickering, reading/writing data.
Page 11
7. Q: Is it possible to access more than one ACER USB 2.0 Flash Stick with one computer? Answer: Sure, theoretically, one computer can access at least 127 pieces of ACER USB 2.0 Flash Stick.