Acer S205F / S200F User's Manual
2.7.2 Procedure
Check for damage especially to the interface connector, do not install if any pins are bent.
Figure 2–11
1
The modules should be installed in rear bays 3 and 4 of the Enclosure
2
With the latch in the open position (see
until the latch engages automatically.
3
Cam the module home by manually closing the latches (see
4
A click should be heard as the latch engages.
Figure 2–12
30
Controller Module Latch Operation
Installing an I/O Module
Figure
2–11), slide the Controller module into the enclosure
Figure
(Figure
2–1,
Figure
2–2).
2–12).