Table of Contents
Advertisement
Getting Started
2.6.1 Connecting Multiple Enclosures
Altos S205F Storage System enclosure expansion is achieved by connecting additional Altos S200F
JBOD enclosures to the expansion port of the Altos S205F Storage System RAID controllers.
Important
Optical modules must be UL (or other North American NRTL) RECOGNISED COMPONENT and the
laser in the module must comply with Laser Class 1, US 21 CFR (J) and EN 60825-1.
If passive copper cables are connected, the cable must not have a connection to the 3.3V supply
(pins 15 and 16).
Expansion enclosures are Altos S200F Storage System.
Note
A maximum of 6 Altos S200Fs can be attached to an Altos S205F Storage System enclosure and a
typical expansion configuration is shown in
Figure 2–8,Figure 2–9
.
Figure 2–8
Single loop conection
Each connection can see all the drives in the enclosure. J7 jumper of Altos S200F is open.
27
Advertisement
Table of Contents
