Table of Contents
Advertisement
G100 Range
5.9.1
Information
The 'Information' option enables the operator to display information such as instrument
type, serial number, current software version, service due date and the dates of the last
factory and user calibrations.
1)
From the 'Main Read Screen' press the 'Menu' key on the instrument panel.
2)
Press 'Key 1' to display general information about the instrument.
5.9.2
Utilities
The 'Utilities' option enables the operator to configure instrument settings prior to taking
readings.
1)
From the 'Main Read Screen' press the 'Menu' key on the instrument panel.
2)
Press 'Key 2' to display the 'Utilities' menu and the following screen is displayed:
5.9.2.1
Time & Date
The 'Time and Date' option enables the operator to check or set the instrument's
internal clock. The current time/date are appended to every stored reading.
1)
From the 'Main Read Screen' press the 'Menu' key on the instrument panel.
2)
Press 'Key 2' to display the 'Utilities' menu.
3)
Press 'Key 1 – Time & Date' and the 'Set Time & Date' menu is displayed:
Copyright Geotechnical Instruments (UK) Limited
Information Screen
Utilities Menu
OMG100N1.21
Page 17
Advertisement
Table of Contents
