Table of Contents
Advertisement
G100 Range
Exhaust tube
Factory settings
Firmware
Analyser Data Manager
General warnings
Inlet port
LCD display
Main Read Screen
Memory
Moisture removal tube
Moisture Trap
O
2
Copyright Geotechnical Instruments (UK) Limited
This is located on the top of the analyser. It is
threaded to take an M5 hose-barb to allow an
exhaust tube to be attached if required.
Clear plastic tubing used to route gases from the
exhaust port.
Default calibration settings preset at time of
factory calibration.
Firmware is the name given to the analyser's
internal software. This can be programmed using
the re-flash command on the Analyser Data
Manager software. The latest software release
can be downloaded from the Geotech website. It
is also automatically updated when the analyser
is returned for servicing.
Analyser Data Manager software enables the
user to maximise the operation of the incubator
analyser. Instrument readings and event log
data may be downloaded to a PC for further
analysis and exported to other applications such
as MS Excel.
Displayed throughout the documentation with a
warning symbol. Warning information may
affect the safety of users.
Port located on the top of the analyser to which
the inlet tube is attached.
Liquid Crystal Display. Fitted to the front panel of
the analyser.
The main analyser screen for normal operations
and all operations are carried out from this
screen.
The analyser memory should not be used as a
permanent storage medium and data collected
should be transferred using the Analyser Data
Manager software.
Device used to remove water vapour from the
sample gas. This is located at the back of the
analyser and should not be covered or partially
covered. This is not user serviceable and should
NOT be removed by the user.
Device to remove condensed water from the
sample line. This can be a simple absorption
filter as per a moisture trap, a catch-pot or
simple return tube depending on the application.
Oxygen gas typically 20.9% in air, measured via
electro-chemical cell.
OMG100N1.21
Page 47
Advertisement
Table of Contents
