Table of Contents
Advertisement
OMG100N1.21
4.2
Panel Key Functions
Front Panel:
Key
Description
A
Main Read Screen
B
Soft Keys
C
On/Off Key
D
Pump Key
E
Scroll Left Key
F
Scroll Down Key
G
Menu Key
H
Enter Key
I
Scroll Up Key
J
Scroll Right Key
Back Panel:
K
Moisture Removal Tube
L
Serial Number
M
Instrument Stand
Note: Do NOT attempt to remove the cover off the back of the analyser which houses
the moisture removal tube.
Do NOT cover the moisture removal tube with your hand when holding the
analyser to take readings.
Page 12
Function
Start and end screen when using the instrument.
The function of the three 'soft-keys' on the front of
the instrument panel are determined by menu
options taken. Functions vary from screen to
screen.
Press the 'On/Off' key briefly to switch the
instrument on and off.
Press the 'Pump' key to start or stop the pump.
Also 'Key 4'. Enables the operator to scroll left to
display more information.
Also 'Key 8'. Enables the operator to scroll down
to display more information.
Press the 'Menu' key to go to the 'Main' menu.
Enables the operator to pre-set values and
settings. Select options from the 'Main' menu to
also view data and readings stored or held.
The 'Enter' key accepts/confirms choices made by
the operator to various functions and operations.
Also, required to confirm numeric data entry.
Also 'Key 2'. Press scroll up to view further
information on the instrument read screen.
Also 'Key 6'. Press scroll right to view further
information on the instrument read screen.
Removes the moisture from the sample gas.
Unique Identification for the instrument.
Verification of the serial number will be required if
Technical Support assistance is needed.
Instrument stand.
Copyright Geotechnical Instruments (UK) Limited
G100 Range
Advertisement
Table of Contents
