Table of Contents
Advertisement
G100 Range
5.9.2.7
Reset
The instrument can be reset by pressing 'Key 7 - Reset' accessed via the 'Utilities'
menu. Selecting this option will clear all user settings and any stored data including the
event log.
A confirmation code (12345678) must be entered to confirm that a reset is really
required.
5.9.3
Calibration
The G100 range of instruments is fully calibrated during manufacture and when returned
for service. However, to improve accuracy between services a user/field calibration can
be performed.
Note: For further information please refer to section '7.0 Calibration' of this manual.
5.9.4
View Data
The 'View Data' option enables the operator to view the stored readings.
1)
From the 'Main Read Screen' press the 'Menu' key on the instrument panel.
2)
Press 'Key 4' to view stored data readings and the following screens are displayed:
View Data – Screen 1
3)
Press 'Key 4 - Scroll Left' and 'Key 6 - Scroll Right' to move through the stored
readings either forwards or backwards. Press 'Key 2 - Scroll Up' and 'Key 8 - Scroll
Down' to switch between the first (CO
group of reading parameters.
4)
Press the soft-key 'More' to refine or filter the readings to view.
Copyright Geotechnical Instruments (UK) Limited
, O
& Baro) and second (T
2
2
View Data – Soft-key 'More'
OMG100N1.21
Press 'Key 8 - Scroll Down'
View Data – Screen 2
, T
& humidity)
1
2
Page 23
Advertisement
Table of Contents
