G100 Range
5.4
Instrument Status Icons
The following icons may be displayed on the instrument read screens:
Icon
(flashing)
(flashing)
(flashing)
(flashing)
(flashing)
Note:
A red backlight is displayed if the pump is stalled or the alarm is activated. For
further information, please refer to 'section 5.9.2.3 Alarms' or 'section 5.9.2.5
Flow Fail'.
5.5
Entering Data
During normal operation the user may be prompted to enter data or information via the
keypad, i.e. entering an ID code or setting an alarm level.
When entering data into the instrument all fields are fixed format and are populated from
the right. For example, to enter a new time 09:25:00 the user would type in 092500 using
the numeric keypad in the following sequence:-
*
: : 0
*
: :09
*
: 0:92
*
:09:25
* 0:92:50
* 09:25:00
Copyright Geotechnical Instruments (UK) Limited
Description
Battery charge state
< 1 hour remaining
Battery charging
Charged
Pump running
Pump stalled (Backlight turns red)
Alarm set
Alarm active (Backlight turns red)
USB connected to PC (flickers when transferring data)
Logging mode active (flashes when memory nearly full)
Temperature probe(s) connected
Humidity probe connected
Service due (every 12 months)
Service overdue
Fault/repair
Waiting
OMG100N1.21
Page 15