2.3.3
Charging the battery pack with a Single Dock
a) Leave the battery pack inside the PDT
1.
Connect the power cord to the power adapter.
2.
Connect the power cord to a power source.
3.
Plug in the connector of the power adapter into the Single Dock.
4.
Insert the PDT into the Single Dock.
When charging the battery pack, the charge indicator on the PDT turns
Red. After the battery pack is fully charged, the indicator turns Green.
CAUTION:
different from the PDT Adapter (5 V DC / 2.6 A). Please use the
Single Cradle Adapter only.
MARS-1030F User Manual
Figure 2.9: Charging with a Single Dock
Single Cradle Adapter supplies 5 V DC / 6.5 A. This is
22