Table of Contents
Advertisement
4. Once the latch is released, tilt the display forward another 10° to expose the 8
screws on top of the stand. The stand should lock into place.
5. When the stand is locked, hold the sides of the display and carefully place it face- down on
a protective surface, with the stand hanging over the edge of your work surface.
6. Using the Torx Tool (12), remove the 8 screws that attach the stand to the back of
your iMac and remove the stand.
Instruction Manual
6
Advertisement
Table of Contents
Need help?
Do you have a question about the ARMPIVSTND and is the answer not in the manual?