Table of Contents
Advertisement
3. Slide the Monitor Mount (3) onto the Support Post (2) until it rests on the Iron
Position Ring (5) and tighten the set screw using the M3 Allen Wrench (15).
iMac / Apple Cinema Display Mounting
1. Power off your iMac / Apple Cinema display and disconnect all cables.
2. Turn the display so the back is facing you, and tilt the display all the way forward.
3. Insert the Access Card (9) into the space directly above the stand to release the
latch.
Note: The access card should go into the space approx. ¾" at a slight upward angle. If it
goes in further, you have missed the latch.
Instruction Manual
5
Advertisement
Table of Contents
Need help?
Do you have a question about the ARMPIVSTND and is the answer not in the manual?