Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 80 Service: Add/Edit
LABEL
Service Name
Description
Protocol
Protocol
Number
OK
Cancel
17.4 The Access Control Screen
Click Security > Firewall > Access Control to display the following screen. This screen displays a list of the
configured incoming or outgoing filtering rules.
Figure 112 Security > Firewall > Access Control
The following table describes the labels in this screen.
Table 81 Security > Firewall > Access Control
LABEL
Add New ACL
Rule
#
Name
Src IP
Dst IP
Service
Chapter 17 Firewall
DESCRIPTION
Enter a unique name (up to 32 printable English keyboard characters, including spaces) for your
customized port.
Enter a description for your customized port.
Choose the IP protocol (TCP, UDP, ICMP, or Other) that defines your customized port from the
drop-down list box. Select Other to be able to enter a protocol number.
This field is displayed if you select Other as the protocol.
Enter the protocol number of your customized port.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Click this to go to add a filter rule for incoming or outgoing IP traffic.
This is the index number of the entry.
This displays the name of the rule.
This displays the source IP addresses to which this rule applies. Please note that a blank source
address is equivalent to Any.
This displays the destination IP addresses to which this rule applies. Please note that a blank
destination address is equivalent to Any.
This displays the transport layer protocol that defines the service and the direction of traffic to
which this rule applies.
VMG3925-B10C/B30C User's Guide
213
Advertisement
Table of Contents
