Add-On Code Required
When UPC-E Add-On Code Required is selected, the engine will only read UPC-E barcodes that
contain add-on codes.
UPC-E Add-On Code Required
Transmit System Character
The first character of UPC-E barcode is the system character "0".
Transmit System Character "0"
UPC-E Extension
Disable UPC-E Extend: Transmit UPC-E barcodes as is.
Enable UPC-E Extend: Extend UPC-E barcodes to make them compatible in length to UPC-A.
Enable UPC-E Extend
73
** UPC-E Add-On Code Not Required
** Do Not Transmit System Character "0"
**Disable UPC-E Extend