Timeout Between Decodes - Newland NLS-FR40 User Manual

Timeout between Decodes

This parameter sets the timeout between decode sessions. When a decode session ends, next session will not happen
until the timeout between decodes expires. It is programmable in 1ms increments from 0ms to 65,535ms. The default
setting is 1,000ms.
Example: Set the timeout between decodes to 500ms
1.
2.
3.
4.
5.
23
【Timeout between
Scan the Enter Setup barcode.
Scan the Timeout between Decodes barcode.
Scan the numeric barcodes "5", "0" and "0".
Scan the Save barcode.
Scan the Exit Setup barcode.
Decodes】
【Enter Setup】
**【Exit Setup】