Newland NLS-EM3095 User Manual page 29

0x0016
Register
Bit
1: Transmit AIM 128 check digit in the format of "~nnn" (nnn: ASCII decimal value of check digit)
Bit 7
0: Do not transmit AIM 128 check digit
1: FNC1 character in AIM 128 transmitted as "~" (ASCII value: 126)
Bit 6
0: FNC1 character in AIM 128 transmitted as GS (ASCII value: 29)
1: Enable AIM ID prefix for AIM 128
Bit 5
Note: Bit4 and Bit3 of register 0x0010 must be set to "01" in order for this parameter to function.
Bit 4 1: Enable AIM 128
1: Transmit Code 128 check digit in the format of "~nnn" (nnn: ASCII decimal value of check digit)
Bit 3
0: Do not transmit Code 128 check digit
1: FNC1 character in Code 128 transmitted as "~" (ASCII value: 126)
Bit 2
0: FNC1 character in Code 128 transmitted as GS (ASCII value: 29)
1: Enable AIM ID prefix for Code 128
Bit 1
Note: Bit4 and Bit3 of register 0x0010 must be set to "01" in order for this parameter to function.
Bit 0 1: Enable Code 128
Register 0x0017
Bit
Bit 7 Reserved
1: Transmit programming barcode data (FNC3 Code 128)
Bit 6
0: Do not transmit programming barcode data (FNC3 Code 128)
1: Enable AIM ID prefix for FNC3 Code 128
Bit 5
Note: Bit4 and Bit3 of register 0x0010 must be set to "01" in order for this parameter to function.
Bit 4 1: Enable FNC3 Code 128
1: Transmit UCC/EAN-128 check digit in the format of "~nnn" (nnn: ASCII decimal value of check
Bit 3 digit)
0: Do not transmit UCC/EAN-128 check digit
1: FNC1 character in UCC/EAN-128 transmitted as "~" (ASCII value: 126)
Bit 2
0: FNC1 character in UCC/EAN-128 transmitted as GS (ASCII value: 29)
1: Enable AIM ID prefix for UCC/EAN-128
Bit 1
Note: Bit4 and Bit3 of register 0x0010 must be set to "01" in order for this parameter to function.
Bit 0 1: Enable UCC/EAN-128
19
Feature
0: Disable AIM ID prefix for AIM 128
0: Disable AIM 128
0: Disable AIM ID prefix for Code 128
0: Disable Code 128
Feature
0: Disable AIM ID prefix for FNC3 Code 128
0: Disable FNC3 Code 128
0: Disable AIM ID prefix for UCC/EAN-128
0: Disable UCC/EAN-128