Web Browser Control; Remote Rs232 Control Via Tcp/Ip Routing; Apply Power; Lcd Panel Boot-Up Information - Intelix INT-44HDX-BSTK Installation And Operation Manual

INT-44HDX
Installation Guide

Web Browser Control

The INT-44HDX includes a web portal to allow control of the matrix via a standard web browser. The IP address
is the same address that is used for TCP/IP control. See page 19 for detailed information regarding the web
browser interface, including customization.

Remote RS232 Control via TCP/IP Routing

The INT-44HDX has the logic to pass RS232 commands to remote devices through the TCP/IP port. If the remote
display uses a baud rate other than 9600 baud, please use the RS232 tunneling option in order to receive device
status queries.
Please see page 29 for more information on how to program the controller in order to implement this feature
in an installation.

Apply Power

Plug the power supply into the power input port on the rear of the matrix.
Connect the IEC power cable into the power supply. The matrix will turn on once the IEC cable is plugged into AC
power.

LCD Panel Boot-up Information

While the matrix is booting up, the front LCD panel will show the IP address of the matrix and the current version
of firmware. After five seconds, it will show Intelix INT-44HDX. The backlight will go dark after five seconds.
See page 27 on how to customize the information displayed on the LCD panel.
16