Xerox VersaLink C8000W User Manual page 229

Symptom
Output colors do not match your
design.
Unwanted white margins on the
prints.
Unwanted white background on
the prints.
Probable Causes
The paper color is not supported, or
you have selected an incorrect
toner adjustment color or other
driver setting.
The page size in your output design
needs to be adjusted.
The output is not printing through
the correct Xerox print driver, or the
driver settings are incorrect.
Xerox
Solutions
Note:
For assistance with a
Fuser or Transfer Roller
image-quality problem,
contact Xerox technical
support. For details, go to
the Xerox
at www.xerox.com/office/
VLC8000Wsupport.
Verify that you are using paper
close in color to the media for
which Xerox designed each color
table. For more information, refer
to the Xerox ® VersaLink
Color Printer Essential Guide to
Successful Printing at
com/versalinkwhite.
Ensure that the page size of the
design is created to minimize
margins, so that the design
matches the output size. Follow the
instructions for reducing the
visbility of margins in the Xerox
VersaLink ® C8000W Color Printer
Essential Guide to Successful
Printing at www.xerox.com/
versalinkwhite.
• Use the Automatic Background
feature. For details, refer to
Setting the Toner Adjustment
• Print through the Xerox print
driver, using the appropriate
Adjust for Toner settings. For
more information, refer to the
Xerox ® VersaLink
Color Printer Essential Guide to
Successful Printing at
xerox.com/versalinkwhite.
® VersaLink ® C8000W Color Printer
Troubleshooting
Support website
®
® C8000W
www.xerox.
®
® C8000W
www.
229
User Guide