Xerox VersaLink C8000W User Manual page 27

Item Name
5 Status LED
6 Pause Icon
7 Notification Banner
Description
• When the printer is powered on, pressing this button displays
a menu on the control panel. From this menu, you can choose
to enter Sleep mode, restart, or power off the printer.
• When the printer is powered on, but in a low-power mode or
Sleep mode, pressing this button wakes the printer.
• When the printer is powered on, holding this button for 10
seconds powers off the printer.
• This button blinks to indicate the power status of the printer.
• When the light blinks slowly, the printer is in low-power mode
or Sleep mode.
• When the light blinks rapidly, the printer is powering off, or
exiting a low-power mode.
This light blinks blue or amber to indicate printer status.
• Blinks blue to indicate the following:
– Blinks blue once to acknowledge a successful
Authentication request.
– Blinks blue once slowly for a print job initiated at the
control panel.
– Blinks blue twice slowly for a print job received from the
network.
– Blinks blue rapidly while the printer is powering on, or to
signal detection of a Wi-Fi Direct connection request.
• Blinks amber to indicate the following:
–
– An error condition or warning that requires your attention.
For example, an out-of-toner condition, a paper jam, or an
out-of-paper condition for the current job.
– A system error, which typically is associated with a fault
code.
When a job is being scanned or processed, a Pause icon appears
in the notification banner area. To pause the current job, touch
the Pause icon. The job pauses with the option to resume or
delete the job.
Notifications and messages are displayed in a pop-up banner
below the apps area. To view the full notification, touch the
center of the banner. After you have reviewed the information,
touch X to close.
Xerox ® VersaLink
Getting Started
® C8000W Color Printer
User Guide
27