Table of Contents
Advertisement
Installation Guide C1251-2S preliminary
6 Description of the connectors / Interfaces
6.1 PE
PE
Protective Earth
•
PE
•
6.2 X1
X1
Motor Supply
PWR+
PGND
Connector has to
Motor Supply: 72VDC nominal, 24...85VDC
be ordered
Absolute max. Rating: 72VDC +20%.
separately: see
External Fuse: 16A slow blow / min. 100VDC
chapter 11)
If motor supply voltage exceeds 90VDC, the drive will go into error state.
•
•
NTI AG / LinMot
Use min. 4mm
2
(AWG11)
Tightening torque: 2Nm (18 lbin)
Use 60/75°C copper conductors only
Conductor Cross-Section 2.5mm
0185-1173-E_2V0_IG_Drives_C1251-2S preliminary
2
(AWG14) max Length 3m
Page 9 of 22
Advertisement
Table of Contents
