Description Of The Connectors / Interfaces - LinMot C1100 series Installation Manual

7 Description of the connectors / Interfaces

7.1 PE
PE Protective Earth
•
PE
•
7.2 X1
X1 Motor Supply
PWR
PGND
Connector has to Motor Supply: 72VDC nominal, 24...85VDC
be ordered
Absolute max. Rating: 72VDC +20%.
separately: see
External Fuse: 16A slow blow / min. 100VDC
chapter 14)
If motor supply voltage exceeds 90VDC, the drive will go into error state.
•
•
Page 10 of 29
Use min. 4mm 2 (AWG11)
Tightening torque: 2Nm (18 lbin)
Use 60/75°C copper conductors only
Conductor Cross-Section 2.5mm
0185-1062-E_6V12_IG_Drives_C1100
2
(AWG14) max Length 3m
Installation Guide C1100
NTI AG / LinMot