Installing The Control Box For Stitch Skipping Detecting Device (Only For The Models Provided With The Stitch Skipping Detecting Device And The Bobbin-Thread Remaining Amount Detecting Device); Installing The Accessory Ring Core (Only For The Eu Type Models); Installing The Accessory Ring Core Supplied With The Electrical Box; Connecting The Power Switch Cable - JUKI LU-2828V-7 Instruction Manual

2-11. Installing the control box for stitch skipping detecting device (only for the models
provided with the stitch skipping detecting device and the bobbin-thread remaining
amount detecting device)
❶
Oil pan side

2-12. Installing the accessory ring core (Only for the EU type models)

2-12-1. Installing the accessory ring core supplied with the electrical box

Refer to accessory manual for "SC-952 Installing the accessory ring core" supplied with the electrical box for
how to install the ring core.

2-13. Connecting the power switch cable

2-13-1. Installing the power switch

❸
❶
❷
❷
❸
B
A
Electrical box
(EU type models:
Reactor box)
Fix DIN rail ❶ supplied with the sewing machine
1)
on the undersurface of table with two wood
screws ❷ .
Attach control box ❸ for the stitch skipping de-
2)
tecting device to DIN rail ❶ while orienting it in
the direction as illustrated in the figure. Fix sec-
tion A of stitch skipping detecting device control
box ❸ in DIN rail ❶ . Fit section B in DIN rail ❶
while pressing section A against DIN rail ❶ .
Fix power switch ❶ under the machine table with
wood screws ❷ .
Fix the cable with staples ❸ supplied with the ma-
chine as accessories in accordance with the forms of
use.
– 12 –