Setting The Ancillary Devices - JUKI LU-2828V-7 Instruction Manual

9-12. Setting the ancillary devices

Setting the ON/OFF status of function of ancillary devices.
<Ancillary device setting screen>
❶
❶ held pressed for three second.
1)
The "mode screen" is displayed.
2) Select "14. Incidental device setting".
3) The "ancillary device setting screen" is dis-
played.
When the device setting of which is to be
changed is selected, the setting screen for
the selected device is displayed.
("1. Center guide" is not used for the LU-
2828V.)
– 159 –