Table of Contents
Advertisement
② Selecting the new condensation custom creating function
❷
<Condensation custom pattern list screen>
③ Inputting the condensation custom number
❸
<New condensation custom pattern creation pattern
number input screen>
④ Creating a condensation custom
A
B
❻
Number of stitches
<Condensation custom edit screen>
❹
❺
Stitch length
❻
❼
Registered condensation custom patterns are
displayed on the screen.
❷ .
Press
The "new condensation custom pattern creation
pattern number input screen" is displayed.
1) Enter the pattern number with numeric keypad
❸ .
An unassigned registration number that is
closest to the entered value in the plus/minus
direction is displayed by pressing
❹ .
2) Press
The "condensation custom edit screen" is
displayed.
In the case the entered number has already
been registered, the prompt message for
overwrite confirmation is displayed.
1) Press ❻ to put the step you have pressed in
the selected state.
2) The selected condensation custom number
is displayed in A and the step number which
is being edited, and the total number of steps
are displayed in B.
3) The "number of stitches" and "stitch length"
for the step are displayed in ❻ . Press ❻ to
put the displayed data in the selected state.
Previous step number screen or the next step
number screen is displayed with
4) "Condensation custom data input screen"
is displayed by pressing ❻ while the step is
being selected.
– 141 –
❺ .
❼ .
Advertisement
Table of Contents
