Enable/Disable Auto Dsc Polling - Standard Horizon MATRIX Series Owner's Manual

25 watt vhf/fm marine transceivers
Hide thumbs Also See for MATRIX Series:
Table of Contents

Advertisement

and CALL 4 entries.
7. When finished, press the
ous times to exit to the radio mode.

9.11.3 Enable/Disable Auto DSC Polling

1. Press the
pear.
2. Rotate the CHANNEL knob to select "AUTO
POS POLLING", then press the
3. Rotate the CHANNEL knob to select the "ACTIVA-
TION", then press the
4. Select "START" to enable transmissions to the
stations or "STOP" to disable transmissions to
stations.
5. Press the
6. Press the
the radio mode.
When the radio receives position reports from a
called vessel the display will show the image to
the right and also output NMEA 0183 DSC and
DSE sentences to a GPS Chart plotter.
Page 74
key. The "DSC Menu" will ap-
soft key.
soft key.
soft key numerous times to exit to
NOTE
soft key numer-
soft key.
GX2000/GX2150

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MATRIX Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Matrix gx2000Matrix gx2150Matrix gx2000b

Table of Contents