Dsc Position Report Call By Manually Entering A Mmsi - Standard Horizon MATRIX Series Owner's Manual

5. Press the
tion to the selected vessel.
6. Press the
operation.
9.9.2.2 DSC Position Report Call manually entering a MMSI
This feature allows you to send your position to another vessel by manually
entering the MMSI of the ship you want to send your position to.
1. Press the
appear.
2. Rotate the CHANNEL knob to select "POS RE-
PORT". (To cancel, press the
3. Press the
and the "Position Report Call" menu will appear.
4. Rotate the CHANNEL knob to select
"MANUAL", then press the
5. Rotate the CHANNEL knob to select the first
number of the MMSI which you want to con-
tact, then press the
the next number.
6. Repeat step 5 to set the MMSI number.
7. If a mistake was made entering in the MMSI
number, repeat pressing the
until the wrong number is selected, then ro-
tate the CHANNEL knob to correct the entry.
8. When finished entering the MMSI number,
press and hold the Press the
9. Press the
tion to the selected vessel.
10. Press the
GX2000/GX2150
soft key to send your posi-
soft key to return to radio
key. The "DSC Menu" will
soft key. The transceiver will beep,
soft key to step to
soft key to send your posi-
soft key to return to radio operation.
soft key.)
soft key.
soft key
soft key.
Page 69