Standard Horizon MATRIX Series Owner's Manual page 71

9.10 MANUAL INPUTTING OF THE GPS LOCATION LAT/LON
You may send the Latitude/Longitude of your vessel manually even if the
GX2000/GX2150 is not connected the GPS receiver unit.
After the position is entered, transmitting a DSC Distress, Position Request, or
Position Report will contain the manually entered position.
1. Press and hold down the
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "DSC
SETUP" menu.
3. Press the
TION INPUT" with the CHANNEL knob.
4. Press the
will beep, and the display will be as shown in
the illustration on the right.
5. Enter the latitude/longitude of your vessel and your
local UTC time in the 24-hour notation by the CHAN-
NEL knob. Rotate the CHANNEL knob to select the
number and press the
cursor to the next character. You may backspace
the cursor by pressing the
make a mistake.
6. To store the data entered, press and hold the
7. Press the
Page 72
soft key, then select "POSI-
soft key. The transceiver
soft key to move the
soft key several times to return to radio operation.
key until
soft key, if you
soft key.
GX2000/GX2150