To Output A Stored Arbitrary Waveform - Keysight 33210A User Manual

1
Chapter 1 Quick Start

To Output a Stored Arbitrary Waveform

To Output a Stored Arbitrary Waveform

Note: Arbitrary waveforms are optionally available with the 33210A
(Option 002). To upgrade your 33210A to include arbitrary waveform
www. keysight
functionality, go to
There are five built-in arbitrary waveforms stored in non-volatile memory.
The following steps show you how to output the built-in "exponential fall"
waveform from the front panel.
For information on creating a custom arbitrary waveform, refer to
Create and Store an Arbitrary Waveform" on page
1 Select the arbitrary waveform function.
When you press the
a temporary message is displayed indicating which waveform is currently
selected (the default is "exponential rise").
2 Select the active waveform.
Press the Select Wform softkey and then press the Built-In softkey to
select from the five built-in waveforms. Then press the Exp Fall softkey.
The waveform is output using the present settings for frequency,
amplitude, and offset unless you change them.
The selected waveform is now assigned to the
press this key, the selected arbitrary waveform is output. To quickly
determine which arbitrary waveform is currently selected, press
26
.com/find/33210U.
key to select the arbitrary waveform function,
"To
113.
key. Whenever you
.