Table of Contents
Advertisement
Simrad ES80 Installation Manual
on an electronic format (e-mail or text file), you can copy the string from the source
document and paste it into the
6
Select
to save the license string and close the
OK
7
Verify that the license string is placed in the
If necessary, select the license string on the left side, and click the arrow button [>] to
move it to the
Currently active licenses
8
Select
and then
Apply
box.
Related topics
Turning on the ES80 for the first time, page 164
Setting to work, page 153
Defining the IP address on the Processor Unit network adapter
for communication with the Wideband Transceiver (WBT)
The Processor Unit and the transceiver(s) communicate on a high capacity Ethernet cable.
If more than one transceiver is used, an Ethernet switch is added. On the Processor Unit,
define the IP address and Subnet mask for the Ethernet port used to communicate with the
transceiver(s). The ES80 automatically assigns an IP address to each transceiver when
they are turned off and on.
Prerequisites
This procedure is made for the Microsoft
that you are familiar with this operating system.
Context
As long as you do not replace the Processor Unit or the network adapter in the Processor
Unit, you only need to do this once.
Procedure
1
On the Processor Unit, close the ES80 program.
2
Open the
Network Connections
a
In the bottom-left corner of your desktop, select the Windows
b
In the search box, type "Network Connections", and open the
dialog box.
3
Right-click the network adapter you are going to use and select
shortcut menu.
170
Type License String
list.
to save all the parameters and close the
Close
®
Windows
dialog box.
dialog box.
Type License String
Currently active licenses
®
10 operating system. It is assumed
Properties
dialog box.
list.
dialog
Installation
®
search function.
Network Connections
on the
416739/A
Advertisement
Table of Contents
