Table of Contents
Advertisement
AC power cable using IEC C13 inline socket
This cable is used to connect any unit or device to AC mains supply. It is commercial, and
normally used for 115 and 230 VAC. The inline socket and plug comply to the IEC60320
standard.
A
IEC13 line socket - may be fitted with a locking device
B
CEE 7/7 male power plug
C
Live (normally identified with Blue insulation)
D
Neutral (normally identified with Brown insulation)
E
Ground (normally identified with Yellow or Yellow/Green insulation)
A standard commercial AC mains cable is used. The power cable is normally terminated
with an female IEC C13 inline socket. The AC mains end is terminated in an AC connector
suitable for the local standard and/or the output sockets on an uninterruptible power supply
(UPS). If this is not the case, you must replace the AC connector.
The typical cable length is between 1,5 and 2 meters. If this is too short you must use an
extension cable (not recommended), mount a new power outlet within range, or make your
own power cable with sufficient length. If you use an uninterruptible power supply (UPS),
you can also move the UPS to a different location within range.
416739/A
Cable layout and interconnections
117
Advertisement
Table of Contents
