7
-4
CK22
When implement is not attached
(1) To Hydraulic Control Valve (3-point hitch)
(2) To Power steering (PS type only)
(3) From Gear Pump
(4) To Gear Pump (Relief Valve)
(5) From Implement
(6) To Implement
When implement is attached
051O704C
(1) Flow Priority Valve
(2) Inlet from Implements (PS 3/8")
(3) Outlet to Implements (PS 3/8")
(4) Directional Valve
(5) Pin (Setting Position for Attaching
Implements)
(6) Pin (Setting Position for Attaching no
Implement)
(7) Relief Valve
(A) In
The main components of the hydraulic
block outlet are shown in the figure. The
hydraulic block outlet is used to take
power out from the tractor to operate
the implements that require hydraulic
pressure.
051O705C
(B) Out