Kioti CK22 Instruction Manual page 111

10
-22 CK22
ADJUSTING TOE-IN
(A) Wheel - to - wheel distance at front
(B) Wheel - to - wheel distance at rear
1. Park tractor on a flat place.
2. Turn steering wheel so front wheels
are in the straight ahead position.
3. Lower the implement, lock the park-
ing brake and stop the engine.
4. Measure distance between tire beads
(center) at front of tire, hub height.
5. Measure distance between tire
beads at rear of tire, hub height.
6. Front distance should be 0.079 ~ 0.
315 in.(2 ~ 8 mm) less than rear
distance. If not, adjust tie rod length.
051OA36C
(1) Lock Nuts
ADJUSTING PROCEDURE
1. Loosen the lock nut and turn the turn-
buckle to adjust the rod length until
the proper toe-in measurement is
obtained.
2. Retighten the lock nut.
EVERY 300 HOURS
REPLACING FUEL FILTER
ELEMENT
051OA37C
(2) Tie Rod (1) Fuel Cock
(2) Fuel Filter Bowl
(3) O-Ring
(4) Filter Element
(5) Screw Ring
(A) Close
(B) Open
051OA38C