Kioti CK22 Instruction Manual page 77

IMPLEMENT LOWERING LIMIT
(1) Hydraulic Control Lever
(2) Lock Bolt
The implement lowering limit can be
changed and adjusted by shifting the
locker.
LOWER LIMIT
The lower limit can be adjusted by mov-
ing the position of the locker. Shifting
the locker backward raises the lower
limit and shifting the locker forward low-
ers the lower limit.
3-POINT HITCH LOWERING
SPEED
051O702C
(1) 3-Point Lowering Speed Knob
(A) FAST
(B) SLOW
! ! ! ! !
To avoid personal injury:
Fast lowering speed may cause
damage or injury. Lowering
speed of implement should be
adjusted to two or more seconds.
The lowering speed of the 3-point hitch
can be controlled by adjusting the 3-
point lowering speed knob.
051O705C
(C) LOCK
CAUTION
HYDRAULIC UNIT
HYDRAULIC BLOCK TYPE
OUTLET
Hydraulic block type outlet is useful
when adding hydraulically operated
equipment such as:
front end loader, front blade, etc.
WHEN IMPLEMENT IS ATTACHED
1. Remove the plugs.
2. Route the implement inlet, outlet, and
return hoses as shown in the
illustration.
3. Move the control screw groove to
"vertical position" when implement
is attached.
IMPORTANT
To prevent overheating and
damage to the hydraulic system
once an implement is detached,
be sure the control screw is
turned back to the "Horizontal
position".
7
-3