Table of Contents
Advertisement
CHECKING FUEL LINE
(1) Fuel Lines
(2) Clamp Bands
1. Check to see that all lines and hose
clamps are tight and not damaged.
2. If hoses and clamps are found worn
or damaged, replace or repair them
at once.
NOTE
If the fuel line is removed, be
sure to properly bleed the fuel
system.
(See "Bleeding Fuel System" in
as required maintenance)
CLEANING AIR CLEANER
PRIMARY ELEMENT
051OA28C
(1) Element
(2) Cover
1. Remove the air cleaner cover and
element.
2. Clean the element:
1) When dry dust adheres to the
2) When carbon or oil adheres to the
051OA29C
(3) Evacuator Valve
3. Replace air cleaner element:
Once yearly or after every sixth
cleaning, whichever comes first.
Check to see if the evacuator valve
is blocked with dust.
PERIODIC SERVICE
element, blow compressed air
from the inside, turning the
element. Pressure of compressed
air must be under 99 psi (7 kgf/
cm
2
, 686 kPa).
element, soak the element in de-
tergent for 15 minutes then wash it
several times in water, rinse with
clean water and dry it naturally. Af-
ter element in fully dried, inspect
inside of the element with a light
and check if it is damaged or not.
NOTE
10
-15
Hide quick links:
Advertisement
Table of Contents
