Table of Contents
Advertisement
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic Switch-off
For safety reasons the appliance turns
off automatically after some time if a
heating function operates and you do not
change any settings.
Temperature (°C) Switch-off time
30 - 115
120 - 195
200 - 230
The Automatic switch-off
does not work with the
functions: Light, Food
Sensor, Duration, End Time.
11. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
11.1 Inner side of the door
In some models, on the inner side of
the door you can find:
• the numbers of the shelf positions.
• information about the heating
functions, recommended shelf
positions and temperatures for typical
dishes.
the heating function
operates.
lets you activate and
deactivate the function:
Set + Go.
(h)
12.5
8.5
5.5
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and
you set the function: Minute
Minder. When the function ends,
the display goes back to the night
brightness.
10.7 Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
cooling fan can continue to operate until
the appliance cools down.
11.2 Advice for special heating
functions of the oven
Keep Warm
Use this function if you want to keep food
warm.
The temperature regulates itself
automatically to 80 °C.
Plate Warming
For warming plates and dishes.
Distribute plates and dishes evenly on
the wire shelf. Move stacks around after
half of the warming time (swap top and
bottom).
The automatic temperature is 70 °C.
ENGLISH
29
Advertisement
Table of Contents
