Table of Contents
Advertisement
Recovery procedures for non-working routers
Problem
Recovery procedures
for non-working
routers(e.g. after a
failed firmware
upgrade flash)
Corrective Action
1. Power on the router, once the Power LED lit red, please press this reset button
using the end of paper clip or other small pointed object immediately.
2. The router's emergency-reflash web interface will then be accessible via
http://192.168.1.1 where you can upload a firmware image to restore the router to
a functional state, Please note that the router will only respond with its web
interface at this address (192.168.1.1), and will not respond to ping request from
your PC or other telnet operations.
112
Advertisement
Table of Contents
