Table of Contents
Advertisement
Enter 1 in menu 24.7 to display the following screen an upload firmware using FTP.
To upload the system firmware, follow the procedure below:
1. Launch the FTP client on your computer.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
of your firmware upgrade file on your computer and "ras" is the
remote file name on the system.
4. The system reboots automatically after a successful firmware upload.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.
Press ENTER to Exit:
21.4.2 Configuration File Upload
Firmware and Configuration File Maintenance
Menu 24.7 - System Maintenance - Upload Firmware
1. Upload Router Firmware
2. Upload Router Configuration File
Enter Menu Selection Number:
Figure 21-13 - System Maintenance Upload Firmware
Menu 24.7.1 - System Maintenance - Upload System Firmware
Figure 21-14 Menu 24.7.1 Upload System Firmware
Prestige 202H User's Guide
21-11
Advertisement
Table of Contents
