Upload Router Firmware; Figure 10-15 Menu 24.7 - System Maintenance - Upload Firmware; Figure 10-16 Menu 24.7.1 - Uploading Router Firmware - ZyXEL Communications Prestige 642 User Manual

Figure 10-15 Menu 24.7 - System Maintenance - Upload Firmware

10.6.1 Upload Router Firmware

The firmware is the program that controls the functions of the Prestige. Menu 24.7.1 shows you the
instructions for uploading the firmware. If you answer yes to the prompt, the Prestige will go into debug
mode. Follow the procedure below to upload the firmware:
1. Enter "atur" after the "Enter Debug Mode" message.
2. Wait for the "Starting XMODEM upload" message before activating Xmodem upload on
your terminal.
3. After successful firmware upload, enter "atgo" to restart the Prestige.
Menu 24.7.1 -- System Maintenance - Upload Router Firmware
To upload router firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
router.
Warning: Proceeding with the upload will erase the current router
firmware.

Figure 10-16 Menu 24.7.1 - Uploading Router Firmware

System Maintenance
Prestige 642 ADSL Internet Access Router
Menu 24.7 -- System Maintenance - Upload Firmware
1. Upload Router Firmware
2. Upload Router Configuration File
Enter Menu Selection Number:
Do You Wish To Proceed:(Y/N)
10-13