If you did not install RVS-Lite and want to use other programs such as AVM Fritz to
access the ISDN router, you must first install the CAPI driver - RVS-CE using the
English version installation wizard (in \DISKs\CEPE\DISK1\) and start the
5.3.4 Configuring NetCAPI
Press the [SACEBAR] to select Yes in Edit NetCAPI Setup field in Menu 2 and press [ENTER] to go to
Menu 2.2 - NetCAPI Setup.
Active= Yes
Max Number of Registered Users= 1
Incoming Data Call Number Matching= NetCAPI
Access List:
The following table describes the fields in this screen.
FIELD
Active
This field allows you to enable or disable NetCAPI. Press the [SPACEBAR] to select
Yes or No
ISDN Setup
Menu 2.2 - NetCAPI Setup
Start IP
End IP
192.168.1.132
192.168.1.145
192.168.14.1
192.168.14.32
192.168.20.7
192.168.20.12
192.168.30.1
192.168.30.3
10.0.0.0
10.255.255.255
_______________
_____________
_______________
_____________
_______________
_____________
default
Press ENTER to Confirm or ESC to Cancel:
Figure 5-6 Menu 2.2 NetCAPI Setup
Table 5-2 Configuring NetCAPI
SETUP.EXE.
Operation
Both
Imcoming
Outgoing
Both
Incoming
_______
_______
_______
Both
DESCRIPTION
Prestige 202H User's Guide
5-7